|
:''For the World War II H-class destroyers, see H-class destroyer (1937)'' The ''Acorn'' class (officially redesignated the H class in 1913) was a class of twenty destroyers of the Royal Navy all built under the 1909-1910 Programme, and completed between 1910 and 1911. The ''Acorn''s served during World War I. ==Design== After the coal-burning of the 1908–1909 shipbuilding programme, the British Admiralty decided to return to oil-fuelled machinery, as pioneered in the of 1905 and of 1907, for the destroyers to be built under the 1909–1910 programme, which became the ''Acorn'' class.〔Gardiner and Gray 1985, p. 74.〕 This change allowed a smaller vessel than the ''Beagle''s even with an increase in armament.〔Brown 2010, p. 69.〕〔Manning 1961, p. 57.〕 While the detailed design of earlier destroyer classes was left to the builders resulting in individual ships differing considerably, this changed for the ''Acorn''s, where a standard hull design was used, allowing more shipyards to bid for orders, thus driving down costs, while reducing the time and effort required for the Admiralty to check and approve each builder's designs. Machinery design, however, was still left to the builders, although it had to fit into the space allowed in the standard design.〔〔Brown 2010, p. 68.〕〔Friedman 2009, pp. 118–119.〕 They had a reasonably uniform appearance, with three funnels, a tall, thin fore funnel, a short, thick central and a short narrow after stack.〔〔Friedman 2009, p. 119.〕 The ships were long between perpendiculars and overall, with a beam of and a draught of between and depending on load. Displacement was normal and full load.〔Friedman 2009, p. 295.〕 Nineteen of the twenty ships of the ''Acorn'' class had three propeller shafts driven by Parsons steam turbines, fed by four boilers (White-Forster boilers in the three J. Samuel White built ships, (, and ), Yarrow boilers in the remaining ships), with the boiler out-takes routed to three funnels. The remaining ship of the class, the John Brown & Company-built , had a two shaft arrangement powered by Brown-Curtis impulse turbines. The ships were required to reach , the same speed as the ''Beagle'' class, which was expected to need .〔〔Friedman 2009, p. 122.〕 The ships had a crew of 72 officers and men.〔 The revised machinery layout freed up deck space, allowing a heavier armament to be carried.〔Friedman 2009, p. 118.〕 Gun armament consisted of two 4inch (102 mm) BL Mk VIII guns, one on the ship's forecastle and one aft, and two 12-pounder (76 mm) QF 12 cwt guns carried in the waist position between the first two funnels.〔〔 Unlike the ''Beagle''s, the forecastle gun was not raised on a bandstand, as it was felt that in heavy seas this generated additional spray.〔 As with the ''Beagle''s, torpedo armament consisted of two 21 inch (533 mm) torpedo tubes, with two reload torpedoes carried, although the tubes were longer, allowing more modern torpedoes to be carried. The torpedo tubes were aft of the funnels, mounted singly with a searchlight position between them.〔 Wartime modifications included the addition of a 3-pounder (47 mm) Vickers anti-aircraft gun and depth charges.〔〔Friedman 2009, p. 147.〕 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「Acorn-class destroyer」の詳細全文を読む スポンサード リンク
|